Precision Waveguide manufactures these units which are used to make connections between components in a waveguide system. They are also used when microwaves are to be transmitted over long paths, like from the transmitter to an antenna site with low signal loss.

Waveguide straight sections are fabricated using precision waveguide and are supplied with standard choke to cover flanges. Units are available in aluminum, brass or copper and have an iridite finish.
SPECIFICATIONS

MODEL #

WAVEGUIDE SIZE

FREQ. RANGE(GHz)

10430

WR-430

1.70 - 2.60

10340

WR-340

2.20 - 3.30

10284

WR-284

2.60 - 3.95

10187

WR-187

3.95 - 5.85

10159

WR-159

4.90 - 7.05

10137

WR-137

5.85 - 8.20

10112

WR-112

7.05 - 10.00

10090

WR-90

8.20-12.40

10075

WR-75

10.0 - 15.00

10062

WR-62

12.40 - 18.00

10042

WR-42

18.00 - 26.50

10028

WR-28

26.50 - 40.00

ORDERING INFORMATION:
Model # - Length(in.), Material Code - Input Flange / Output Flange if other than standard
Example: P/N 10187-12A is an aluminum WR-187 waveguide, 12 in. long, with choke to cover flanges
MATERIAL CODE: A=Aluminum B=Brass C=Copper
FLANGE TYPE: 1=Choke 2=Cover 5=CPRG 6=CPRF

line.jpg (6567 bytes)
Precision Waveguide Components, Inc. 561 Overdrive Circle Hernando, FL 34442
Phone: 352-489-9893 Fax: 352-489-2251 e-mail: precision.waveguide@worldnet.att.net
[ Back ] [ Home ] [ Up ] [ Next ]